Mp2: i386 C-callable Assembly Language Functions Solution

I. OBJECTIVES:




The purpose of this assignment is to gain some familiarity with writing C callable functions that do things that can’t be done in C such as accessing I/O ports. Copy all files from /courses/cs341/s17/cheungr/mp2 to your mp2 subdirectory of cs341.Use the provided makefile for all builds except where instructed otherwise. As in mp1, use ulab to build all your executables and use VMs to run and debug your code.




II. DESCRIPTION:




Part 1: program to count the number of characters




Write a C callable assembler function that counts the number of characters in a string. The function should work for any string and character. The address of the string and character to be counted are passed as arguments according to the C function prototype:



int count (char *string, char c);




Since there are arguments, your assembly function should use a stack frame. It should return the count to the calling C program in %eax. Use 32-bit quantities for all data. chars have only 8 significant bits but they are stored in memory (and on the stack) as 32 bits in “little endian” format. After moving a 32 bit char value from memory to a register, the char value is available in the 8 lsb’s, e.g. %al.




You are given a C calling program that calls count to count the number of a user entered character in a user entered string and prints the result. The C code “driver” is in countc.c. Put your assembly code in count.s. Then build it using the same makefile by invoking “make A=count”.




In count.script, provide a script showing a run with a Tutor breakpoint set where the count is incremented, showing the count (in a register) each time the breakpoint is hit, just before the increment is made. In the script, show how you determined where to set the breakpoint, i.e., how you determined where the increment instruction is located in memory.




Part 2: Program to print binary characters




You are given a C calling program (printbinc.c). Call your file printbin.s. The C caller for this program provides a char to the assembly function printbin. It asks the user for a hex number between 0 and 0xff, converts the input from an ASCII string to a char value, passes it to printbin as an argument, and displays the returned string which should be the ASCII characters for the binary value, e.g. for entry of the hex value 0x3d, you will get the printout: “The binary format for character = is 0011 1101” You can see the function prototype for the printbin function in the calling C code.



1
University of Massachusetts - Boston
Dr. Ronald Cheung
Computer Architecture and Organization
 
Machine Project Assignment















The function printbin should be C callable using a stack frame and call an assembly language subprogram “donibble” that is not required to be C callable. Avoiding the use of stack frames is one way assembly code can be more efficient than C compiler generated code. The function printbin needs to declare space in the .data section for storage of a string to be returned and return the address of that location in the %eax. While processing the bits of the input argument, keep a pointer to the string in an available register. printbin and donibble can store an ascii character 0x20, 0x30, or 0x31 in the string indirectly via that register and then increment the pointer in that register until the entire return string has been filled in.




The donibble function handles one half of the char value producing the four ASCII character (0/1) for the bits in one hex digit. Printbin should call donibble twice once with each nibble to be processed in half of an available register, e.g. the %al. Donibble should scan the 4 bits of the register and move an appropriate ascii code into the string for each bit. Printbin adds the space between the two nibbles. In file printbin.script, show a run of printbin on the SAPC to display 0xab, and then a run with a breakpoint set at the helper function, to prove that it is called exactly twice. You can use Tutor or remote gdb here as you wish.




Part 3: Program a UART directly in assembler




Please note that we consider this the old-fashioned way to do this programming! The current way is to use assembler only where it is required.



Write an assembler function to read and echo characters. The C driver does the same initial logic determining whether or not the console is a COM port and if so which one, and if not, just return. In the new version, it then goes on to ask the user for the "escape character" that stops the echo loop. This can be CONTROL-A, but it doesn't have to be. The user types the actual character, not its ASCII code or whatever, to specify the escape character. Then the C driver calls the assembler echo function:




void echo(int comport, unsigned char esc_char)




The assembler code does the loop with in and out instructions to do the actual I/O, testing for the special esc_char and returning when it is seen coming from the user. Call your files echo.s and echoc.c. In file echo.script, show a run with "abc" followed by the esc_char, a second run with "abcde<CRxy" followed by the esc_char, and a third run with "abcde<CR<LFxy", then esc_char. If your keyboard doesn't have a key marked line feed, use <control-J. Since we haven't asked for any special treatment for <CR, the "xy" of the second test should overwrite the "ab", but the <LF should prevent this in the third test.




Write a C-callable assembler version of the library strcpy function called mystrcpy (to avoid conflicts with the library version) that copies the contents of one string to a user provided array and returns a pointer to the provided array. The function prototype is:



char *mystrcpy(char *s, char *ct);




Write your code in a source file named strcpy.s. The provided C driver (strcpyc.c) takes user entered input for the source string and checks both the pointer returned and the effect of the copy. Choose test cases that exercise different possibilities in the logic of your code, e.g. a null



2
University of Massachusetts - Boston
Dr. Ronald Cheung
Computer Architecture and Organization
 
Machine Project Assignment












string. What would happen if you choose a string longer than the destination array in the Cdriver?







III. TURN-IN FOR GRADING:




On ulab, make one typescript file with the script command for each of the four parts of this project capturing the execution of following commands: pwd, ls -lg, cat xxx.s, and the make build for the .lnx file. The name of these files should be xxx_ulab.script. On the tutor-vserver, make one typescript file for each of the four parts of this project capturing the following commands: scp transfer of the .lnx file to the VM and mtip to run the .lnx file on tutor. The name of these files should be xxx_vm.script. When you have completed each part, use scp to transfer the script files back to your mp2 directory. Turn in a hard copy of all script files.




Leave working versions of the source files and the script files in your mp2 project directory. The grader or I may rebuild them and/or run them to test them. In the event that you are unable to correctly complete this assignment by the due date, do not remove the work you were able to accomplish - partial credit is always better than none.



























































































































3