Homework Assignment #1 Solution

Assignment Objectives




The primary objective of this homework assignment is for you to become familiar with the basics of MIPS assem-bly language, including bitwise operators, conditionals, loops and system calls.




Getting Started




Visit Piazza and download the “bare bones” file hw1.asm. Open the file and fill in the following information at the top:




your first and last name as they appear in Blackboard



your Net ID (e.g., jsmith)



your Stony Brook ID # (e.g., 111999999)



Having this information at the top of the file helps us locate your work. If you forget to include this information but don’t remember until after the deadline has passed, don’t worry about it – we will track down your submission.




Configuring MARS for Command-line Arguments




Your program is going to accept command-line arguments, which will be provided as input to the program. To tell MARS that we wish to accept command-line arguments, we must go to the Settings menu and select:




Program arguments provided to the MIPS program.





































After assembling your program, in the Execute tab you should see a text box where you can type in your command-line arguments before running the program:

























CSE 220 – Homework Assignment #1 2
























The command-line arguments must be separated by spaces. Note that your program must always be run with at least one command-line argument. When your program is assembled and then run, the arguments to your program are placed in main memory before execution. Information about the arguments is then provided to your code using the argument registers, $a0 and $a1. The $a0 register contains the number of arguments passed to your program. The $a1 register contains the starting address of an array of strings. Each element in the array is the starting address of the argument specified on the command-line.




All arguments are saved in memory as ASCII character strings, terminated by the null character (ASCII 0, which is denoted by the character ’n0’ in assembly code). So, for example, if we want to read an integer argument on the command-line, we actually must take it as a string of digit characters (e.g., "2034") and then convert it to an integer ourselves in assembly code. We have provided code for you that stores the addresses of the command-line arguments at pre-defined, unique labels (e.g., addr arg0, addr arg1, etc.) Note that the strings themselves are not stored at these labels. Rather, the starting addresses of the strings are stored at those labels. You will need to use load instructions to obtain the contents of these strings stored at the addresses: lw to load the address of a string, then multiple lbu instructions to get the characters.










Part I: Validate the First Command-line Argument and the Number of Command-line Arguments




For this assignment you will be implementing several operations that perform computations and do data manipu-lation.




In hw1.asm, begin writing your program immediately after the label called start coding here.







You may declare more items in the .data section after the provided code. Any code that has already been specified must appear exactly as defined in the provided file. Do not remove or rename these labels, as doing so will negatively impact grading.




The number of arguments is stored in memory at the label num args by code already provided for you. You will need to use various system calls to print integers and strings that your code generates. For example, to print a string in MIPS, you need to use system call 4. You can find a listing of all the official MARS system calls on the MARS website. You can also find the documentation for all instructions and supported system calls within MARS itself. Click the ä in the tool bar to open it:































CSE 220 – Homework Assignment #1 3
















































The following is a list of the operations that your program will execute. Each operation is identified by a single character. The character is given by the first command-line argument (whose address is addr arg0). The param-eter(s) to each argument are given as the remaining command-line arguments (located at addresses addr arg1, addr arg2, etc.). Not all operations expect the same number of parameters. In this first part of the assignment your program must make sure that each operation is valid and has been given the correct number of parameters. Perform the validations in the following order:







The first command-line argument must be a string of length one that consists of one of the following charac-ters: F, C or 2. If the argument is a letter, it must be given in uppercase. If the argument is not one of these strings, print the string found at label invalid operation error and exit the program (via system call 10).



If the first command-line argument is F or 2, then there must be exactly one other argument. If the total number of command-line arguments is not two, print the string found at label invalid args error and exit the program (via system call 10).



If the first command-line argument is C, then there must be exactly three other arguments. If the total number of command-line arguments is not four, print the string found at label invalid args error and exit the program (via system call 10).






Important: You must use the provided invalid operation error and invalid args error strings when printing error messages. There are also five other strings marked with the comment # Output strings, which you must use for generating the output of your program. Do not create your own labels for printing output to the screen. If your output is marked as incorrect by the grading scripts because of typos, then it is your fault for not using the provided strings, and you will lose all credit for those test cases. See page 1 for more details about how your work will be graded.














































CSE 220 – Homework Assignment #1 4
Examples:




Command-line Arguments
Expected Output
DB abc
INVALID


OPERATION








f xyz


INVALID


OPERATION






1


INVALID


OPERATION








F abc def
INVALID


ARGS








2


INVALID


ARGS










C 145
6842
INVALID


ARGS








C 1 2
3 4
INVALID


ARGS
















Review of Character Strings in MIPS Assembly




In assembly, a string is a one-dimensional array of unsigned bytes. Therefore, to read each character of the string we typically need to use a loop. Suppose that $s0 contains the base address of the string (that is, the address of the first character of the string). We could use the instruction lbu $t0, 0($s0) to copy the first character of the string into $t0. To get the next character of the string, we have two options: (i) add 1 to the contents of $s0 and then execute lbu $t0, 0($s0) again, or (ii) leave the contents of $s0 alone and execute lbu $t0, 1($s0). Since most of the command-line arguments for this program can be of arbitrary length, you will probably find that you must use the first approach in most cases. Also note that syntax like lbu $t0, $t1($s0) is not valid; an immediate value (a constant) must be given outside the parentheses.




There is no length() function or method in assembly to tell us how long a string is. Therefore, we need a a loop which traverses a string until it reads the null character, ASCII 0 (‘n0’). The null character denotes the end of the string in memory.




If your program determines that the first command-line argument is a valid command and that it has been given a correct number of additional arguments, your program continues by executing the appropriate operation as specified below. Note that you are permitted to add code to the .data section as necessary to implement these operations.







Part II: Interpret a String of 0s and 1s as a Two’s Complement Number




First Argument: 2




Second Argument: a two’s complement value (given as a string of 0 and 1 characters)




The 2 operation treats the second command-line argument as a string of 0 and 1 characters that represent a two’s-complement number. The leftmost character is the most significant bit of the integer. The argument might contain fewer than 32 characters. The operation converts the string into a two’s-complement value and prints it in decimal to the screen, with a newline (‘nn’) at the end.




Input Validation:




The second command-line argument must consist only of at most 32 0 and 1 characters. If the argument contains invalid characters or more than 32 characters, print the string found at label invalid args error and exit the program (via system call 10).













CSE 220 – Homework Assignment #1 5
You may assume that valid, converted values can fit within a single 32-bit register.




Examples:




Command-line Arguments
Expected Output
2 111111111111111111111111111111111
INVALID


ARGS








2 000000000000
0












2 0101
5












2 0101101
45








2 01111111111111111111111111111111
2147483647








2 1101110
-18












2 1111111111
-1








2 10000000000000000000000000000000
-2147483648














Part III: Interpret a String of Hexadecimal Digits as a 32-bit Floating-point Number




First Argument: F




Second Argument: a string of exactly 8 hexadecimal digits




The F operation treats the second command-line argument as a string of exactly 8 hexadecimal digit characters, 0–9, A–F (uppercase letters only), that represent a 32-bit floating-point number given in IEEE 754 notation. The first two characters together give the most significant byte of the 32-bit floating-point representation, whereas the last two characters provide the least significant byte. When the input is not a special value (zero, infinity or NaN), the operation extracts the sign bit, exponent and fraction from the input. The operation then prints the number in the following format:

1.fraction_2*2ˆexponent




The fraction is printed in binary using exactly 23 bits to the right of the radix point. The exponent is printed in decimal after subtracting the bias of 127. The program must not print any leading zeroes for the exponent.




If the number is negative, then print a minus sign in front of the value. Here’s an example:




-1.00110111101000010100000_2*2ˆ15




Likewise, if the exponent is negative, print a minus sign in front of it:




1.00110111101000010100000_2*2ˆ-15




If the entire number and/or exponent is positive, do not print a plus sign.




After printing the number in this format, print a newline character (‘nn’) on the output. A string at label nl has been provided in the .data section for you that contains the newline character.




When the input is a special value, print the corresponding string as indicated in the table below. Do not cre-ate your own strings in the .data section to print these outputs. Rather, use the strings found at the labels zero str, neg infinity str, pos infinity str, NaN str and floating point str at the top of the provided .asm file.













CSE 220 – Homework Assignment #1 6
To implement this operation you can (and must) use only integer registers. MIPS instructions that use the floating-point registers have been disabled in the CSE 220 version of MARS.




Input Validation:




The second command-line argument must consist of exactly 8 hexadecimal digit characters (0–9, A–F), with uppercase letters only for digits A–F. If the argument contains invalid characters and/or is of the wrong length, print the string found at label invalid args error and exit the program (via system call 10).







Examples:




Command-line Arguments
Expected Output
F 1234567
INVALID


ARGS














F G1231234
INVALID


ARGS














F 6318675309
INVALID


ARGS
















F 00000000 or
Zero
F 80000000






























F FF800000
-Inf














F 7F800000
+Inf














F 7F800001 thru
NaN
F 7FFFFFFF






























F FF800001 thru
NaN
F FFFFFFFF






























F 42864000
1.00001100100000000000000


2*2ˆ6


F 14483B47
1.10010000011101101000111


2*2ˆ-87


F 94483B47
-1.10010000011101101000111


2*2ˆ-87


F C46AB32C
-1.11010101011001100101100


2*2ˆ9








Part IV: Convert a Positive Integer from One Base to Another Base




First Argument: C




Second Argument: a string of decimal digits representing a number in a base




Third Argument: a string of decimal digits representing the base we are converting from




Fourth Argument: a string of decimal digits representing the base we are converting to




This operation takes a number given in one base (the “from” base), converts it to another base (the “to” base) and prints out the number in the other base, with a newline (‘nn’) at the end. For example, C 165 9 7 means that we want the computer to print the value of 1659 as it would be represented in base 7 (i.e., 260).




The SBU version of MARS contains a special system call (#84) for converting a string of ASCII digit characters into a decimal integer. You are welcome to use that system call for converting the third and fourth arguments to the “C” operation into integers. For example, suppose $s0 contained the starting address of a string of digit characters we wanted to convert into an integer. We would write this code to convert it into a number:




move $a0, $s0




li $v0, 84




syscall













CSE 220 – Homework Assignment #1 7
The resulting integer would be available in $v0.




Input Validation:




You may assume that only digits appear in the second, third and fourth command-line arguments. You may assume that the largest value we might need to convert is 231 1. You may assume that the third and fourth command-line arguments represent integers in the range [2; 10]. However, the program must check that the input number (second argument) is a valid representation of a number in the “from” base (third argument). If this is not the case, the operation prints the string found at label invalid args error and exits the program (via system call #10).







Examples:




Command-line Arguments
Expected Output
C 8154
8 7
INVALID


ARGS










C000510
0












C 23568 9 10
15776














C 0101
3 8
12














C 4123
5 5
4123








C 111102365 7 2
11001101001100001100000
















Academic Honesty Policy




Be aware that before being able to submit your homework, you will be required on Blackboard to indicate your understanding of, and agreement with, the following Academic Honesty Statement:




I understand that representing another person’s work as my own is academically dishonest.



I understand that copying, even with modifications, a solution from another source (such as the web or another person) as a part of my answer constitutes plagiarism.



I understand that sharing parts of my homework solutions (text write-up, schematics, code, electronic or hard-copy) is academic dishonesty and helps others plagiarize my work.



I understand that protecting my work from possible plagiarism is my responsibility. I understand the im-portance of saving my work such that it is visible only to me.



I understand that passing information that is relevant to a homework/exam to others in the course (either lecture or even in the future!) for their private use constitutes academic dishonesty. I will only discuss material that I am willing to openly post on the discussion board.



I understand that academic dishonesty is treated very seriously in this course. I understand that the instructor will report any incident of academic dishonesty to the College of Engineering and Applied Sciences.



I understand that the penalty for academic dishonesty might not be immediately administered. For instance, cheating in a homework may be discovered and penalized after the grades for that homework have been recorded.



I understand that buying or paying another entity for any code, partial or in its entirety, and submitting it as my own work is considered academic dishonesty.



I understand that there are no extenuating circumstances for academic dishonesty.












CSE 220 – Homework Assignment #1 8
How to Submit Your Work for Grading




To submit your hw1.asm file for grading:




Login to Blackboard and locate the course account for CSE 220.



Click on “Assignments” in the left-hand menu and find the link for the Academic Honesty Statement for this homework assignment.



Hit “Begin” to view the Academic Honesty Statement. Read the statement. If you agree to the statement, enter YES in the text box and hit the “Save and Submit” button. If you do not agree to the statement, speak with the instructor.



Click on “Assignments” again in the left-hand menu and click the link to submit this assignment, which should be now visible.



Click the “Browse My Computer” button and locate the hw1.asm file. Submit only that one .asm file.



Click the “Submit” button to submit your work for grading.



Oops, I messed up and I need to resubmit a file!




No worries! Just follow steps 4–6 again. We will grade only your last submission.































































































































CSE 220 – Homework Assignment #1 9