Here is a chance for you to add a Graphical User Interface (GUI) to your own MATLAB-‐based circuit simulator!
Your GUI should:
1. Allow the user to select a file and load it,
2. Display the elements as a table with(at least) the following information:
a. The identifier for the element (“type” (V, I, or R) and number)
b. The connections for the element (“from” and “to” node)
c. The value of the element
3. Display the solution
4. Allow the user to modify the values of the elements and run the simulation again.
5. Allow the user to specify a range of values (min, max and step size) for a singleelement and display the voltage of a single node as a function of the value of that element. For example, in the circuit given in Part A of the project, the user should be able to specify the value of R1 varying between 1 and 10 Ohms with a step size of 1 Ohm, and plot the voltage of node 3 as a function of the value of R1.
Always remember to have comments in your code and provide some “help” information to guide the users.
