$29
Programming Exercise 2: Logistic Regression Solution
Machine Learning
Introduction
In this exercise, you will implement logistic regression and apply it to two di erent datasets. Before starting on the programming exercise, we strongly recommend watching the video lectures and completing the review questions for the associated topics.
To get started with the exercise, you will need to download the starter code and unzip its contents to the directory where you wish to complete the exercise. If needed, use the cd command in Octave/MATLAB to change to this directory before starting this exercise.
You can also nd instructions for installing Octave/MATLAB in the \En-vironment Setup Instructions" of the course website.
Files included in this exercise
ex2.m - Octave/MATLAB script that steps you through the exercise ex2 reg.m - Octave/MATLAB script for the later parts of the exercise ex2data1.txt - Training set for the rst half of the exercise ex2data2.txt - Training set for the second half of the exercise submit.m - Submission script that sends your solutions to our servers mapFeature.m - Function to generate polynomial features plotDecisionBoundary.m - Function to plot classi er’s decision bound-ary
[?] plotData.m - Function to plot 2D classi cation data
[?] sigmoid.m - Sigmoid Function
[?] costFunction.m - Logistic Regression Cost Function
[?] predict.m - Logistic Regression Prediction Function
[?] costFunctionReg.m - Regularized Logistic Regression Cost
indicates les you will need to complete
1
Throughout the exercise, you will be using the scripts ex2.m and ex2 reg.m. These scripts set up the dataset for the problems and make calls to functions that you will write. You do not need to modify either of them. You are only required to modify functions in other les, by following the instructions in this assignment.
Where to get help
The exercises in this course use Octave1 or MATLAB, a high-level program-ming language well-suited for numerical computations. If you do not have Octave or MATLAB installed, please refer to the installation instructions in the \Environment Setup Instructions" of the course website.
At the Octave/MATLAB command line, typing help followed by a func-tion name displays documentation for a built-in function. For example, help plot will bring up help information for plotting. Further documentation for Octave functions can be found at the Octave documentation pages. MAT-LAB documentation can be found at the MATLAB documentation pages.
We also strongly encourage using the online Discussions to discuss ex-ercises with other students. However, do not look at any source code written by others or share your source code with others.
Logistic Regression
In this part of the exercise, you will build a logistic regression model to predict whether a student gets admitted into a university.
Suppose that you are the administrator of a university department and you want to determine each applicant’s chance of admission based on their results on two exams. You have historical data from previous applicants that you can use as a training set for logistic regression. For each training example, you have the applicant’s scores on two exams and the admissions decision.
Your task is to build a classi cation model that estimates an applicant’s probability of admission based the scores from those two exams. This outline and the framework code in ex2.m will guide you through the exercise.
1Octave is a free alternative to MATLAB. For the programming exercises, you are free to use either Octave or MATLAB.
2
1.1 Visualizing the data
Before starting to implement any learning algorithm, it is always good to visualize the data if possible. In the rst part of ex2.m, the code will load the data and display it on a 2-dimensional plot by calling the function plotData.
You will now complete the code in plotData so that it displays a gure like Figure 1, where the axes are the two exam scores, and the positive and negative examples are shown with di erent markers.
Exam 2 score
100
Admitted
Not admitted
90
80
70
60
50
40
30
40
50
60
70
80
90
100
30
Exam 1 score
Figure 1: Scatter plot of training data
To help you get more familiar with plotting, we have left plotData.m empty so you can try to implement it yourself. However, this is an optional (ungraded) exercise. We also provide our implementation below so you can copy it or refer to it. If you choose to copy our example, make sure you learn what each of its commands is doing by consulting the Octave/MATLAB documentation.
Find Indices of Positive and Negative Examples pos = find(y==1); neg = find(y == 0);
Plot Examples
plot(X(pos, 1), X(pos, 2), 'k+','LineWidth', 2, ...
'MarkerSize', 7);
plot(X(neg, 1), X(neg, 2), 'ko', 'MarkerFaceColor', 'y', ...
'MarkerSize', 7);
3
1.2 Implementation
1.2.1 Warmup exercise: sigmoid function
Before you start with the actual cost function, recall that the logistic regres-sion hypothesis is de ned as:
h (x) = g( T x);
where function g is the sigmoid function. The sigmoid function is de ned as:
1
g(z) = 1 + e z :
Your rst step is to implement this function in sigmoid.m so it can be called by the rest of your program. When you are nished, try testing a few values by calling sigmoid(x) at the Octave/MATLAB command line. For large positive values of x, the sigmoid should be close to 1, while for large negative values, the sigmoid should be close to 0. Evaluating sigmoid(0) should give you exactly 0.5. Your code should also work with vectors and matrices. For a matrix, your function should perform the sigmoid function on every element.
You can submit your solution for grading by typing submit at the Oc-tave/MATLAB command line. The submission script will prompt you for your login e-mail and submission token and ask you which les you want to submit. You can obtain a submission token from the web page for the assignment.
You should now submit your solutions.
1.2.2 Cost function and gradient
Now you will implement the cost function and gradient for logistic regression.
Complete the code in costFunction.m to return the cost and gradient.
Recall that the cost function in logistic regression is
1
Xi
J( )=
m
y(i) log(h (x(i))) (1 y(i)) log(1 h (x(i))) ;
m
=1
and the gradient of the cost is a vector of the same length as where the jth element (for j = 0; 1; : : : ; n) is de ned as follows:
4
@J( )
=
1
m
(h (x(i)) y(i))xj(i)
Xi
@ j
m
=1
Note that while this gradient looks identical to the linear regression gra-dient, the formula is actually di erent because linear and logistic regression have di erent de nitions of h (x).
Once you are done, ex2.m will call your costFunction using the initial parameters of . You should see that the cost is about 0.693.
You should now submit your solutions.
1.2.3 Learning parameters using fminunc
In the previous assignment, you found the optimal parameters of a linear re-gression model by implementing gradent descent. You wrote a cost function and calculated its gradient, then took a gradient descent step accordingly. This time, instead of taking gradient descent steps, you will use an Octave/-MATLAB built-in function called fminunc.
Octave/MATLAB’s fminunc is an optimization solver that nds the min-imum of an unconstrained2 function. For logistic regression, you want to optimize the cost function J( ) with parameters .
Concretely, you are going to use fminunc to nd the best parameters for the logistic regression cost function, given a xed dataset (of X and y values). You will pass to fminunc the following inputs:
The initial values of the parameters we are trying to optimize.
A function that, when given the training set and a particular , computes the logistic regression cost and gradient with respect to for the dataset (X, y)
In ex2.m, we already have code written to call fminunc with the correct arguments.
Constraints in optimization often refer to constraints on the parameters, for example, constraints that bound the possible values can take (e.g., 1). Logistic regression does not have such constraints since is allowed to take any real value.
5
Set options for fminunc
options = optimset('GradObj', 'on', 'MaxIter', 400);
Run fminunc to obtain the optimal theta
This function will return theta and the cost [theta, cost] = ...
fminunc(@(t)(costFunction(t, X, y)), initial theta, options);
In this code snippet, we rst de ned the options to be used with fminunc. Speci cally, we set the GradObj option to on, which tells fminunc that our function returns both the cost and the gradient. This allows fminunc to use the gradient when minimizing the function. Furthermore, we set the MaxIter option to 400, so that fminunc will run for at most 400 steps before it terminates.
To specify the actual function we are minimizing, we use a \short-hand" for specifying functions with the @(t) ( costFunction(t, X, y) ) . This creates a function, with argument t, which calls your costFunction. This allows us to wrap the costFunction for use with fminunc.
If you have completed the costFunction correctly, fminunc will converge on the right optimization parameters and return the nal values of the cost and . Notice that by using fminunc, you did not have to write any loops yourself, or set a learning rate like you did for gradient descent. This is all done by fminunc: you only needed to provide a function calculating the cost and the gradient.
Once fminunc completes, ex2.m will call your costFunction function using the optimal parameters of . You should see that the cost is about 0.203.
This nal value will then be used to plot the decision boundary on the training data, resulting in a gure similar to Figure 2. We also encourage you to look at the code in plotDecisionBoundary.m to see how to plot such a boundary using the values.
1.2.4 Evaluating logistic regression
After learning the parameters, you can use the model to predict whether a particular student will be admitted. For a student with an Exam 1 score of 45 and an Exam 2 score of 85, you should expect to see an admission probability of 0.776.
Another way to evaluate the quality of the parameters we have found is to see how well the learned model predicts on our training set. In this
6
100
Admitted
Not admitted
90
80
2 score
70
Exam
60
50
40
30
40
50
60
70
80
90
100
30
Exam 1 score
Figure 2: Training data with decision boundary
part, your task is to complete the code in predict.m. The predict function will produce \1" or \0" predictions given a dataset and a learned parameter vector .
After you have completed the code in predict.m, the ex2.m script will proceed to report the training accuracy of your classi er by computing the percentage of examples it got correct.
You should now submit your solutions.
Regularized logistic regression
In this part of the exercise, you will implement regularized logistic regression to predict whether microchips from a fabrication plant passes quality assur-ance (QA). During QA, each microchip goes through various tests to ensure it is functioning correctly.
Suppose you are the product manager of the factory and you have the test results for some microchips on two di erent tests. From these two tests, you would like to determine whether the microchips should be accepted or rejected. To help you make the decision, you have a dataset of test results on past microchips, from which you can build a logistic regression model.
7
You will use another script, ex2 reg.m to complete this portion of the exercise.
2.1 Visualizing the data
Similar to the previous parts of this exercise, plotData is used to generate a gure like Figure 3, where the axes are the two test scores, and the positive (y = 1, accepted) and negative (y = 0, rejected) examples are shown with di erent markers.
Microchip Test 2
1.2
y = 1
1
y = 0
0.8
0.6
0.4
0.2
0
−0.2
−0.4
−0.6
−0.8
−0.5
0
0.5
1
1.5
−1
Microchip Test 1
Figure 3: Plot of training data
Figure 3 shows that our dataset cannot be separated into positive and negative examples by a straight-line through the plot. Therefore, a straight-forward application of logistic regression will not perform well on this dataset since logistic regression will only be able to nd a linear decision boundary.
2.2 Feature mapping
One way to t the data better is to create more features from each data point. In the provided function mapFeature.m, we will map the features into all polynomial terms of x1 and x2 up to the sixth power.
8
2
x1
3
6
1
7
2
6
x1
7
6
x2
7
mapFeature(x) =
6
x1x2
7
6
2
7
6
x2
7
6
3
7
6
x1
7
6
.
7
6
..
7
6
7
6
x1x5
7
6
2
7
6
x6
7
6
2
7
4
5
As a result of this mapping, our vector of two features (the scores on two QA tests) has been transformed into a 28-dimensional vector. A logistic regression classi er trained on this higher-dimension feature vector will have a more complex decision boundary and will appear nonlinear when drawn in our 2-dimensional plot.
While the feature mapping allows us to build a more expressive classi er, it also more susceptible to over tting. In the next parts of the exercise, you will implement regularized logistic regression to t the data and also see for yourself how regularization can help combat the over tting problem.
2.3 Cost function and gradient
Now you will implement code to compute the cost function and gradient for regularized logistic regression. Complete the code in costFunctionReg.m to return the cost and gradient.
Recall that the regularized cost function in logistic regression is
J()=1
m
y(i) log(h (x(i))) (1 y(i)) log(1 h (x(i))) +
n
j2:
Xi
X
m
2m
=1
j=1
Note that you should not regularize the parameter 0. In Octave/MAT-LAB, recall that indexing starts from 1, hence, you should not be regularizing the theta(1) parameter (which corresponds to 0) in the code. The gradient of the cost function is a vector where the jth element is de ned as follows:
@J( )
=
1
m
(h (x(i)) y(i))xj(i)
for j = 0
@ 0
m
Xi
=1
9
@ j
=
m
=1 (h (x(i))
y(i))xj
! + m j for j 1
@J( )
1
m
(i)
Xi
Once you are done, ex2 reg.m will call your costFunctionReg function using the initial value of (initialized to all zeros). You should see that the cost is about 0.693.
You should now submit your solutions.
2.3.1 Learning parameters using fminunc
Similar to the previous parts, you will use fminunc to learn the optimal parameters . If you have completed the cost and gradient for regularized logistic regression (costFunctionReg.m) correctly, you should be able to step through the next part of ex2 reg.m to learn the parameters using fminunc.
2.4 Plotting the decision boundary
To help you visualize the model learned by this classi er, we have pro-vided the function plotDecisionBoundary.m which plots the (non-linear) decision boundary that separates the positive and negative examples. In plotDecisionBoundary.m, we plot the non-linear decision boundary by com-puting the classi er’s predictions on an evenly spaced grid and then and drew a contour plot of where the predictions change from y = 0 to y = 1.
After learning the parameters , the next step in ex reg.m will plot a decision boundary similar to Figure 4.
10
2.5 Optional (ungraded) exercises
In this part of the exercise, you will get to try out di erent regularization parameters for the dataset to understand how regularization prevents over-tting.
Notice the changes in the decision boundary as you vary . With a small , you should nd that the classi er gets almost every training example correct, but draws a very complicated boundary, thus over tting the data (Figure 5). This is not a good decision boundary: for example, it predicts that a point at x = ( 0:25; 1:5) is accepted (y = 1), which seems to be an incorrect decision given the training set.
With a larger , you should see a plot that shows an simpler decision boundary which still separates the positives and negatives fairly well. How-ever, if is set to too high a value, you will not get a good t and the decision boundary will not follow the data so well, thus under tting the data (Figure 6).
You do not need to submit any solutions for these optional (ungraded) exercises.
1.2
lambda = 1
y = 1
1
y = 0
Decision boundary
0.8
0.6
2
0.4
Test
Microchip
0.2
0
−0.2
−0.4
−0.6
−0.8
−0.5
0
0.5
1
1.5
−1
Microchip Test 1
Figure 4: Training data with decision boundary ( = 1)
11
1.5
lambda = 0
y = 1
y = 0
Decision boundary
1
2
0.5
Test
Microchip
0
−0.5
−1
−0.5
0
0.5
1
1.5
−1
Microchip Test 1
Figure 5: No regularization (Over tting) ( = 0)
1.2
lambda = 100
y = 1
1
y = 0
Decision boundary
0.8
0.6
2
0.4
Test
Microchip
0.2
0
−0.2
−0.4
−0.6
−0.8
−0.5
0
0.5
1
1.5
−1
Microchip Test 1
Figure 6: Too much regularization (Under tting) ( = 100)
12
Submission and Grading
After completing various parts of the assignment, be sure to use the submit function system to submit your solutions to our servers. The following is a breakdown of how each part of this exercise is scored.
Part
Submitted File
Points
Sigmoid Function
sigmoid.m
5 points
Compute cost for logistic regression
costFunction.m
30 points
Gradient for logistic regression
costFunction.m
30 points
Predict Function
predict.m
5 points
Compute cost for regularized LR
costFunctionReg.m
15 points
Gradient for regularized LR
costFunctionReg.m
15 points
Total Points
100 points
You are allowed to submit your solutions multiple times, and we will take only the highest score into consideration.
13
