Design at least two passive linear circuits to transfer maximum power to a load of 200 from a voltage source of source impedance 50 at a chosen frequency in the range 10 to 20MHz .
Figure 1: Matching Circuit
Preliminary Work
Verify your proposed method using SPICE.
Experimental Work
Implement your circuit. Measure the power you generated and compare it with the maximum power available from the source. Explain the di erence between your SPICE and measurement results.
Available materials in the lab
Toroidal cores to design inductors or transformers: T25-10, T37-7, T38-8, T50-7 from Micrometals. There are standard values of capacitors and resistors available.
