Cpe 357 Assignment 4

Starting from:

~~$30~~

$24

The tao that can be tar(1)ed

is not the entire Tao.

The path that can be specified

is not the Full Path.

— /usr/games/fortune

Note

This could be prettier (and might even get so if you

look back later), but all of the important details

are there.

(Who am I kidding? It’s been ten years. Don’t

expect a lot of revisions.)

Due by 11:59:59pm, Monday, November 27th

(Ok, this really should be due before Thanksgiving, but I know I won’t look at it so I’ll let you make the call. Don’t say I made you work over Thanksgiving.) This assignment may be done with a partner.

Program: mytar

This assignment is to build a file archiving tool, mytar, that is a version of the standard utility tar(1). Tar(1), standing for Tape ARchive, is one of the more ancient programs from the Unix world. It bundles files and directories together in a single file so that it can be easily transferred to some other location.

Your program must be able to build and restore archives in a way that is interoperable with GNU tar.

Running mytar

Usage:

mytar [ctxvS]f tarfile [ path [ ... ] ]

Mytar is a subset of tar and only supports five options. One of ‘c’, ‘t’, or ‘x’ is required to be present. Traditionally, ‘f’ is optional, but you are not required to support its being absent.

Options Supported:

Create an archive

Print the table of contents of an archive x Extract the contents of an archive

v Increases verbosity

f Specifies archive filename

S Be strict about standards compliance

The ’f ’ option

The argument following the ’f’ option specifies the name of the archive file to use. Real tar uses stdin or stdout if the ’f’ is missing, but you may require ’f’ to be present for this assignment.

Archive Creation (c)

In create mode, mytar creates a new archive. If the archive file exists, it is truncated to zero length, then all the remaining arguments on the command line are taken as paths to be added to the archive.

If a given path is a directory, that directory and all the files and directories below it are added to the archive.

If the verbose (’v’) option is set, mytar lists files as they are added, one per line.

Archive Listing (t)

In list (Table of contents) mode, mytar lists the contents of the given archive file, in order, one per line. If no names are given on the command line, mytar, lists all the files in the archive. If a name or names are given on the command line, mytar will list the given path and any and all descendents of it. That is, all files and directories beginning with the same series of directories.

If the verbose (’v’) option is set, mytar gives expanded information about each file as it lists them. For example:

% mytar tvf archive.tar

drwx------
pnico/pnico
0
2010-11-02
13:49 Testdir/
-rwx--x--
x pnico/pnico
72
2010-11-02
13:49
Testdir/file1
-rw-------
pnico/pnico
200
2010-11-02
13:49
Testdir/file2
%

The elements of each listing are the permissions, the owner/group, the size, the last modified date (mtime) and the filename. The symbolic names stored in the header are preferable. If the symbolic names are absent, use the numeric ones. (See the description of the header below.)

The listing consists of a line of the following fields, each separated by a space:

Field
Width
Description

Permissions
10
(See below)

Owner/Group
17
Name of the file’s owner

Size
8
Size of the file (in bytes)

Mtime
16
Last modification time (YYYY-MM-DD HH:MM)

Name
variable
Filename

The permissions string consists of 10 characters. The first gives the files type: ‘d’ for a directory, ‘l’ for a symbolic links, or ‘-’ for any other type of file. The remaining nine characters indicate the presence or absence of read (r), write (w) or execute (x) permission for the file’s owner, group, and other respectively. If a permission is not granted, write a dash (-).

Archive Extraction (x)

In extract mode, mytar extracts files from an new archive. If no names are given on the command line, mytar, extracts all the files in the archive. If a name or names are given on the command line, mytar will extract the given path and any and all descendents of it just like listing.

Extract restores the modification time of the extracted files. (It should leave the access time alone.)

If the verbose (’v’) option is set, mytar lists files as they are extracted, one per line.

Strict (S)

This option forces mytar to be strict in its interpretation of the standard. That is, it requires the magic number to be nul-terminated and checks for the version number.

Without this option, mytar only checks for the five characters of “ustar” in the magic number and ignores the version field. This is required to interoperate with GNU’s tar.

Optional Extensions

Not worth anything extra, but if you get into it. . .

Allow stdin/stdout (make “-” a valid argument to -f, and/or make f optional)

Support for integers that do not fit in the allowed number of octal digits: When it discovers that an integer will not fit in octal in the allotted field it places it there anyway as a binary integer in network (big-endian) order. To signal that it’s done this, it sets the first bit of the field to 1, then the rest is the integer. You are certainly not required to do this, but it is the most robust solution. Since it is beyond the scope of what I expected you to do, you may use the functions in Figure 1 to help with it.

This is only in non-strict mode, of course.

Why do this: Some of you have very large user IDs that will not fit in 7 octal digits. Doing this will allow you to test your mytar on your own files. If you have this problem and don’t want to implement this extension, alternatives are to substitue a special uid (e.g. “7777777”) or test on files owned by the system which will have lower user IDs.

Other details

These are various details that did not fit nicely in the descriptions above.

If duplicate entries exist in an archive, use the latest one.

If “S” is not specified, must interact with GNU’s tar.

Directory names stored in the archive must end in ’/’

File types supported:

– Regular files (Regular and alternate markings)

– Directories

– Symbolic links

Any file of any other type should cause an error to be reported but no action taken.

Because tar was originally intended as a tape archiver, the order in which files are listed or extracted should be the order in which they are found in the archive. It is a much more expensive operation to back up a tape (or even a file) and re-read than to look through a list of strings to see if this is one of the files you’re looking for.

#INCLUDE <arpa/inet.h>

#INCLUDE <string.h>

uint32 t extract special int(CHAR *where, INT len) {

/* For interoperability with GNU tar. GNU seems to

set the high–order bit of the first byte, then

treat the rest of the field as a binary integer

in network byte order.

I don’t know for sure if it’s a 32 or 64–bit int, but for

this version, we’ll only support 32. (well, 31)

returns the integer on success, –1 on failure.

In spite of the name of htonl(), it converts int32 t

*/

int32 t val= −1;

IF ( (len >= SIZEOF(val)) && (where[0] & 0x80)) {

/* the top bit is set and we have space

* extract the last four bytes */

val = *(int32 t *)(where+len−SIZEOF(val));

val = ntohl(val); /* convert to host byte order */

}

RETURN val;

}

INT insert special int(CHAR *where, size t size, int32 t val) { /* For interoperability with GNU tar. GNU seems to

set the high–order bit of the first byte, then

treat the rest of the field as a binary integer

in network byte order.

Insert the given integer into the given field

using this technique. Returns 0 on success, nonzero

otherwise

*/

INT err=0;

IF ( val < 0 || ( size < SIZEOF(val)) ) {

/* if it’s negative, bit 31 is set and we can’t use the flag

if len is too small, we can’t write it. Either way, we’re

done.

*/

err++;

} ELSE {

/* game on....*/

memset(where, 0, size); /* Clear out the buﬀer */

*(int32 t *)(where+size−SIZEOF(val)) = htonl(val); /* place the int */

*where |= 0x80; /* set that high–order bit */

}

RETURN err;

}

Figure 1: Functions for inserting and removing binary integers from non-conforming headers.

USTAR Archive Format

Mytar implements the POSIX-specified USTAR archive format. The format of the archive is fully specified as part of POSIX, available on the web at http://www.unix.org/single unix specification/1. It is also described below.

File format documented at

http://pubs.opengroup.org/onlinepubs/9699919799/utilities/pax.html#tag 20 92 13 06 /usr/include/tar.h contains useful definitions and a description of the header fields.

Archive Format

A USTAR archive is a sequential list of records each of which consists of a header block followed by zero or more data blocks. After the last record of the file is an End of Archive marker which consists of two blocks of all zero bytes.

All blocks are 512 bytes

Any portion of a block not completely filled by data (e.g. the last block of a file) should be filled by zero (’\0’) bytes.

Header Format

The header fields are described in the Figure 2.

Field Name
Oﬀset
Length
Notes

name
0
100
NUL-terminated if NUL fits
mode
100
8

uid
108
8

gid
116
8

size
124
12

mtime
136
12

chksum
148
8

typeflag
156
1

linkname
157
100
NUL-terminated if NUL fits
magic
257
6
must be “ustar”, NUL-terminated)
version
263
2
must be “00” (zero-zero)
uname
265
32
NUL-terminated
gname
297
32
NUL-terminated
devmajor
329
8

devminor
337
8

prefix
345
155
NUL-terminated if NUL fits

Figure 2: Fields of the USTAR header

The fields are:

name The name of the archived file is produced by concatenating the prefix (if of non-zero length), a slash, and the name field. If the prefix is of zero length, name is the complete name.

You will be required to register, but it’s free.

mode The numeric representation of the file protection modes stored as an octal number in an ASCII string terminated by one or more space or nul characters. Valid mode bits are defined in Figure 3.

04000
S ISUID
Set UID on execution.
02000
S ISGID
Set GID on execution.
01000
S ISVTX†
Sticky bit.
00400
S IRUSR
Read permission for file owner class.
00200
S IWUSR
Write permission for file owner class.
00100
S IXUSR
Execute/search permission for file owner class.
00040
S IRGRP
Read permission for file group class.
00020
S IWGRP
Write permission for file group class.
00010
S IXGRP
Execute/search permission for file group class.
00004
S IROTH
Read permission for file other class.
00002
S IWOTH
Write permission for file other class.
00001
S IXOTH
Execute/search permission for file other class.

The sticky bit is not actually part of the POSIX standard, but is stored by most unix implementations. You may need to define it yourself or dig out the appropriate feature test macro.

Figure 3: Valid mode bits as defined in the standard.

uid The numeric user id of the file owner, encoded as an octal number in an ascii string terminated by one or more space or nul characters.

gid The numeric group id of the file owner, encoded as an octal number in an ascii string terminated by one or more space or nul characters.

size The size of the file encoded as an octal number in an ASCII string terminated by one or more space or nul characters. The size of symlinks and directories is zero.

mtime The last modfied time of the file encoded as an octal number in an ASCII string terminated by one or more space or nul characters.

chksum The checksum is the result of adding up all the bytes (treated as unsigned bytes) in the header block, encoded as an octal number in an ASCII string terminated by one or more space or nul characters. For purposes of computing the checksum the checksum field itself is treated as if it were filled with spaces.

typeflag A character indicating the type of the archived file. Valid file types for mytar are:

’0’
Regular file
’\0’
Regular file (alternate)
’2’
symbolic link
’5’
directory

linkname If the file is of type symlink (or hard link should you choose to implement that) this is the value of the link.

magic The magic number shall consist of the string “ustar”, nul-terminated.

version The version shall be the two characters “00” (zero-zero)

uname The symbolic name of the file’s owner, truncated to fit if necessary, nul-terminated.

gname The symbolic name of the file’s group, truncated to fit if necessary, nul-terminated.

devmajor Major number of an archived device special file, encoded as an octal number in an ASCII string terminated by one or more space or nul characters.

devminor Minor number of an archived device special file, encoded as an octal number in an ASCII string terminated by one or more space or nul characters.

prefix See “name” above.

When creating archives, as much of the name as will fit should be placed in the name field, with the overflow going to prefix.

Other things waiting to be integrated into the narrative:

Permissions for extracted files

– By default, tar does not try to restore a files’s archived permissions.

– It oﬀers rw permission to everyone, and the umask applies.

– If any execute bits are set in the archived permissions, tar oﬀers execute permission to all on the extracted file.

Permissions for extracted directories

– Just like files, but execute permission is oﬀered by default since it’d be silly not to.

Diﬀerences between mytar and tar(1):

– you don’t have to handle stdin/stdout

– only handles regular files, directories, and symlinks

– verbose option can be repeated

– “S” strict option that makes it strict on conformance.

– mytar will archive absolute paths. Most tar implementations refuse.

If you want to be able to try diﬃng against my archive files, my version of mytar goes through its arguments in order and does a preorder DFS for each while inserting. Also, when there are options available for the encoding and termination of numbers, I choose to fill the entire field, padding with leading zeros if necessary, and terminate with nul(’\0’). It is not required to do these things this way, but a successful diﬀ is a comforting thing.

Error handling:

– When reading, stop at the first corrupt record. When writing, skip files you can’t read, but go on. (report, of course)

– If you find a bad header (invalid checksum, magic number, or version (as appropriate)), declare that you’re lost and give up.

– If other errors are encountered, report them with meaningful error messages and continue if possible.

– Paths are at most 256 characters. If a path is longer than that, tar must print an error message

– Names can only be broken on a ’/’. If a name can not be partitioned, print an error and go on to the next file (if any).

Tricks and Tools

Useful functions in Figure 4.

<stdint.h> defines a set of fixed-width data types which are more portable than ints when you really need to know how big something is. These exist in signed and unsigned versions named intXX t and uintXX t, where XX is the number of bits. For example, uint32 t size makes size a 32-bit unsigned integer.

Think about your data structures.

Also, while thinking about them, remember that the compiler is allowed to pad structs. If you do not want it to add padding you can use the gcc attribute modifier to forbid that (in return for potentially slower code) like so:

struct

attribute

((

packed

)) thing {

uint8

t byte;
/*

a byte */

uint32

t word;
/*

a 4-byte int */

};

You may find this useful for reading and writing headers in one move.

Write a function that builds directory trees (Note: a file being in the archive does not require all its parent directories to exist.)

Write functions that pack, unpack, and verify tar headers. (don’t go on until you are sure you are reading headers accurately)

Write a recursive traversal of the directory tree that only descends into real direcories (avoid symlinks).

Be careful not to recurse on “.” or “..”

Be careful to remember where you started. All of the arguments are relative to the original current working directory.

Write debugging functions early so you can observe your progress.

Coding Standards and Make

See the pages on coding standards and make on the cpe 357 class web page.

memset(3)

Functions for manipulating blocks of memory
memmove(3)

memcpy(3)

strtol(3)

For converting numbers in various bases.

strcpy(3)

For copying strings
strncpy(3)

lstat(2)

to get information about a file including its type, owner, size and

permissions.

chdir(2)

for navigating within the filesystem.
getcwd(3)

htonl(3)

transforming to and from network byte order
ntohl(3)

opendir(3)

for reading and manipulating directory entries.
closedir(3)

readdir(3)

rewinddir(3)

etc.

getpwuid(3)

for help translating the user and group IDs returned by lstat(2)
getgrgid(3)

into names.

readlink(2)

to read the value of a symbolic link
symlink(2)

to create a symbolic link

printf(3)

for generating formatted output.
sprintf(3)

snprintf(3)

utime(2)

for restoring modification times.

time(2)

for handling times.
localtime(3)

strftime(3)

Figure 4: Some potentially useful library functions

What to turn in

Submit via handin to the asgn4 directory of the pn-cs357 account:

Your well-documented source files.

A makefile (called Makefile) that will build your program when given the target “mytar” or no target.

A README file that contains:

– Your name(s). In addition to your names, please include your Cal Poly login names with it, in parentheses. E.g. (pnico)

– Any special instructions for running your program.

– Any other thing you want me to know while I am grading it.

The README file should be plain text, i.e, not a Word document, and should be named “README”, all capitals with no extension.

Sample runs

Below are some sample runs of mytar. I will also place executable versions in ~pn-cs357/demos so you can run it yourself.

ls -lR Test Test:

total 8

drwx------. 2 pnico pnico 4096 Nov 5 06:17 Subdir

-rw-------
. 1
pnico pnico
96 Nov

5 06:16 file1
Test/Subdir:

total 8

-rw-------
.
1
pnico
pnico 156
Nov
5
06:17
file1
-rwx------
.
1
pnico
pnico
135
Nov
5
06:17
file2

mytar cvf Test.tar Test Test

Test/Subdir

Test/Subdir/file1

Test/Subdir/file2

Test/file1

mytar tf Test.tar Test/ Test/Subdir/ Test/Subdir/file1 Test/Subdir/file2 Test/file1
mytar tvf Test.tar

drwx------
pnico/pnico
0
2010-11-05
06:17 Test/
drwx------
pnico/pnico
0
2010-11-05
06:17
Test/Subdir/
-rw-------
pnico/pnico
156
2010-11-05
06:17
Test/Subdir/file1

-rwx------
pnico/pnico
135
2010-11-05
06:17
Test/Subdir/file2
-rw-------
pnico/pnico
96
2010-11-05
06:16
Test/file1

mkdir Output

cd Output

ls

mytar tf ../Test.tar Test/

Test/Subdir/

Test/Subdir/file1

Test/Subdir/file2

Test/file1

mytar tf ../Test.tar Test/

Test/Subdir/

Test/Subdir/file1

Test/Subdir/file2

Test/file1

mytar xvf ../Test.tar Test/Subdir Test/Subdir/

Test/Subdir/file1

Test/Subdir/file2

ls -R Test/

Test/:

Subdir

Test/Subdir:

file1 file2

mytar xvf ../Test.tar Test/

Test/Subdir/

Test/Subdir/file1

Test/Subdir/file2

Test/file1

ls -R Test/

Test/:

Subdir file1

Test/Subdir:

file1 file2

%

11