In this assignment you will design a small version of MIPS processor. Its name is MiniMIPS. In MiniMIPS, there are 8 registers each holding 32 bit numbers. The instruction width is 16 bits instead of 32 bits in MIPS. There are two types of instructions in MiniMIPS.
R’-type:
Op (4bits)
Rs (3bits)
Rt (3bits)
Rd(3bits)
Func(3bits)
I’-type:
Op (4bits)
Rs (3bits)
Rt (3bits)
Imm (10bits)
The instructions of MiniMIPS are given in below table:
Instr
Opcode
Func
AND
0000
000
ADD
0000
001
SUB
0000
010
XOR
0000
011
NOR
0000
100
OR
0000
101
ADDI
0001
XXX
ANDI
0010
XXX
ORI
0011
XXX
NORI
0100
XXX
BEQ
0101
XXX
BNE
0110
XXX
SLTI
0111
XXX
LW
1000
XXX
SW
1001
XXX
They all work similar to the actual MIPS Green Sheet. As immediate field is 10 bits you should extend it to 32 bits. Do not forget, only the instruction width and number of registers are different remaining part is same as MIPS. The register contents are 32 bits. Zero register is always 0. All other rules in MIPS are also rules of MiniMIPS.
Submission Rules:
• Platform: Teams CSE 331 page
• For late submission: -20pt for each day, end of the 5 days submission will be closed.
o Submission format must be as follows:
o StudentNo.zip -> StudentNo (folder) -> StudentNo.qar, Report_StudentNo.pdf
Report file must be include:
• You need to write a testbench module and show testbench results for each module with SS.
• For MiniMIPS part, you need to try at least two different numbers for all operations (OpCode:0000 x1+x2 result= , …, OpCode =1001 x1|x2 resut=…,
• Explain if you have missing parts, bonus parts or adding parts.
• 2-3 pages will suffice
Design & Codes Rules:
• You will use Structural or Dataflow Verilog.
• Behavioral Verilog is not allowed other than memory components. Only register and memory modules can use behavioral Verilog because of register assignment.
• For testbench structure, please follow DraftForHW4.qar project.
